Lighting Systems
LED LIGHTING
TAVSAN is taking the poultry industry to the next level with its new LED product.
ADVANTAGES
- Economical LED lighting (6.3W / 35,000 operating life)
- 220V-50/60 Hz, direct connection to flat cable
- 3000 K warm white color
Up to 123lm/W high efficiency - 30,000h operating life
Brightness adjustment from 0-100% with Hato 230 Dimmer - Flicker-free light – FI = < 0.03
- Quick and easy installation
- Wide lighting angle
- No additional connection sensor required
- Resistant to Water and Dust – IP68
LED Lighting Features
It is specifically designed for those who want to start with professional poultry lighting. LED lighting improves life in many ways for farmers and poultry. As a result, it reduces costs and increases farm performance.
Technical Specifications
•Operating Voltage: 220 – 240 VAC
•Operating Frequency: 50-60 Hz
•Expected Average Lifespan: 35,000 hours*
•Dimmability: Yes, phase dimming
•Operating Temperature: -10°C (14°F) ~ +40°C (104°F)
•Storage Temperature: -25°C (-13°F) ~ +80°C (176°F)
•Net Weight: 80 g / 0.18 lbs
•Cover Material: Impact-resistant PMMA
•Base Material: ABS
•Warranty: 2 Years**
•Application: Poultry – Ducks – Turkey
Accessories
•AC Connection Cable 0.6m
•HATO Connection Box
•HATO 230 DIMMER (Phase dimming)
Light Spectrum and Distribution
Polar diagram – Shows light distribution. The light intensity is measured at the given angles.
Installation Example
•Minimum: 3 lamps
•Maximum: 120 lamps
•Protection Test: Waterproof test IPX7 (protects against immersion effects from 15 cm to 1 meter)
Markings
•%100 Flicker Free
•Dimensions: 95 mm x 80 mm
Dimmer Features
Dimensions / Installation
•DIN Rail Mounting 35mm EN60715
•Width 6 TE = 105 mm
•Weight = 300 g
Dimensions:
•Height: 90 mm
•Width: 68 mm
•Depth: 36 mm
Technical Specifications
•Nominal Voltage: 220-240VAC / 50-60Hz
•Load: Min. 10VA, Max. 850VA
•Maximum Current: 50A
•Internal Fuse: F6.3 AH
•Main Connection: 0.5 – 4mm² AWG 20 – 10
•Control Connection: 0.5 – 2.5mm² AWG 20 – 13
•Operating Temperature: 0°C (32°F) < Ta < +50°C (122°F)
•Protection Class: IP20
•Compliance: EN 60669-1, EN 60669-2-1, EN 55015
•Insulation: 4KV
•Mounting Method: Can be mounted on 35mm DIN rail
•Output Ub: Output for external sensors, 18VDC max. 8mA
•Control Input: 1-10V
•Adjustable Minimum: 0-40%
•Adjustable Maximum: 60-100%
•Warranty: 3 years
Standard DIP Switch Settings
•DIP Switch 1: Off: 1-10V Mode, On: Button Mode (short press = on/off, long press = dimming)
•DIP Switch 2: Off: <0.7V – Off, On: < 1V – Minimum Dimming Level
•DIP Switch 3: Off / On: Depending on the situation
•DIP Switch 4/5: Off: Non-functional, On: Non-functional
General Safety Notes
1.Failure to follow warnings and installation instructions may result in serious personal injury or damage to the installation.
2.Installation must comply with the latest electrical regulations and national requirements.
3.Disconnect the electrical power before installing or servicing the product in any way.
4.Broken or damaged products must be removed immediately.
5.The person responsible for any alterations to the product will be considered the manufacturer.
6.HATO is not responsible for damages resulting from improper use or application.
7.To reduce the risk of fire and overheating, ensure all connections are made according to standard regulations and installation instructions.
8.Do not install this product in locations where exposed conductors can come into contact with any conductive materials.
9.Do not install any product closer than 15 cm to drapes or similar flammable materials or heat sources.
10.To minimize the risk of electrical interference, route power cables separately from dimming signal cables. In particular, keep cables carrying heavy (inductive) loads away from signal cables. If both cables must cross, do so vertically to minimize interference.
11.Install the product in a suitable enclosure for its environment.
Needled LED Lighting
LED LIGHTING (DIMMABLE)
•Energy-efficient LED lighting (equivalent to 75W incandescent bulb)
•220V-50/60 Hz, direct connection to flat cable
•3000 K warm white color
•High efficiency up to 112 lm/W
•30,000 hours of lifespan
•Brightness adjustment from 0-100% with iLOX dimmer EPU-1500
•Flicker-free light – Fl = < 0.03
•Quick and easy installation
•Wide beam angle
•No additional connection socket required
•Water and dust resistant – IP68
Voltage | Nominal lighting input voltage | 220 – 240V 50/60Hz |
Installation method | Socket | Not required |
LED driver | Dimmable up to 0% without flickering | 0-100% |
Humidity Environment | 20% – 90% RH | |
Protection class | IP rating | IP 68 |
Thermal environment | Minimum operating temperature | -20˚C |
Maximum lighting temperature | 80˚C | |
Nominal CCT | 3000˚K | |
Color | Warm White | |
Weight | 120 gr | |
Lumens | 900 Lumens / 112 lm/W | |
Watt | 8W | |
Lifespan | 30,000 hours and above |